Custom Design 3D MicroCrystalline Resin Metallic Floors 

Metallic Color Pigments are special effect pigments composed of mica nano-particles coated with various organic and inorganic pigments to create pearlescent and iridescent effects that mimic the natural look of stone and rock formations. These unique pigments are designed to be blended with our 100% solids clear MCR Epoxy Middle Coat. When the metallic particles are mixed with epoxy, they give the coating a shine that reflects light and creates eye-catching dramatic effects.


Metallic epoxy floor coatings are a hot new trend that is slowly finding its way into the home as very high tech and exotic looking flooring option. These coatings create a glossy and deep looking 3D effect on your floor with a variety of different colours. Some even create a beautiful three-dimensional appearance that gives the illusion of craters, ripples, and swirling rivers of metallic looking plasma. 

As beautiful and stunning as these floors look, they are considered a high-performance floor coating that is designed to last for years. For the first coat, our water-based epoxy primer needs to be installed. We recommend applying a tinted primer and find that black makes the metallic colours pop. The second coat involves the actual Designer Metallic Epoxy coat, followed by the third coat of clear epoxy on top.


The wide range of colours and modern technology allow the creation of unique self-levelling floors with a 3D metallic colourful look that can match your interior decoration 


Now you have the ability to customize and to personalize your Interior by choosing from a wide range of colours and pigments to create that "WOW" look that will inspire anyone.


  • The 3D Microcrystalline resin floors are robust, slip resistant and durable.

  • Residential resin floors thickness is approximately 3-5mm.

  • Seamless impervious finish.

  • High mechanical strength, impact and scratch resistant.

  • The 3D design looks aesthetically pleasing.

  • It offers the possibility of transforming a room into an environment or a place you dream of, a beach, forest, waterfall.

  • Low dirt retention, easy to clean a look after.

  • The floors do not have any gaps where dirt and dust can be accumulated, therefore they are applied in accordance with all ecological and hygienic regulations.

  • The 3D floors can have an anti-sleep layer.

  • Hi, UV stability on the normal daylight conditions.

3D metallic or pigments designs floors are widely applied in private houses, bathroom, living room, guest room, entertainment centres.

They are also perfect for children's rooms or child care centres.
A 3D floor can completely change the interior of any house.
A high-quality properly installed floor will delight you with its beautiful appearance, practicality, originality and uniqueness for many years to come.



1.MCR- Primer---Two Components Floor Coating System 2:1 Mix Ratio.A+B


Waterproof Barrier, Against Moisture, Corrosion Inhibiting, Excellent Adhesion Designed for commercial, industrial, and residential concrete, cement, wood and tile floor coating, to penetrate deeper into the pores in order to achieve a better mechanical bond and produce a thinner film or tie coat that the much thicker base coat can chemically fuse with.


2.MCR Middle Coat---Two Components Floor Coating System 2:1 Mix Ratio A+B (mix the pigments)


Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance, Designed for commercial, industrial, and residential buildings. Concrete, cement, wood and tile floor coating, can be used with metallic Color Pigments, Solid Color Pigments, Color Flakes, Quartz, Color Granules, Mica Flakes, Polymer Color Flakes, Paint Chips, Color Glitters.















3.MCR- Top Coat / High Gloss Top Coat---Two Components Floor Coating System 2:1 Mix Ratio A+B


Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance, Anti-slip and UV Stable
Designed for commercial, industrial, and residential buildings. Concrete, cement, wood and tile floor coating, can be applied directly over Epoxy Middle Coating for a high gloss protective finish.





MCR Primer   - Thickness  1mm-  Quantity/sqm 150grams 


MCR Middle Coat -  Thickness  2mm- 5mm  Quantity/sqm 300grams + pigments 100grams -300grams no set rules as desired 


MCR Top Coat - Thickness  1mm-  Quantity/sqm 150grams

Above coverage is approximate as much depends on the preparation of the floor  


How to apply MCR metallic on your floor?


Step by Step Guide to installing your bespoke MCR floor


Step 1. Prepare the surface.

Preparation of the substrate is necessary in order to ensure adhesion between the MCR product and the substrate. Suitable methods are sanding or diamond-grinding. Any surfaces that have been contaminated with oils may also require chemical cleaning.


Step 2. Cleaning of the floor.

Use an industrial vacuum that picks up even the smallest dust particles. The floor must be cleaned of all specks of dust and residues before starting to prime. Otherwise, you will have various particles trapped within the coat and adhesion will be significantly weakened. The less micro-dust on the surface the less primer you will need.


Step 3. Prime the floor with a suitable primer of MCR

Always prime the floor, don't believe claims that priming is not necessary. Priming will give your floor a longer life and better adhesion to the substrate. Priming will seal the substrate thus eliminating the risks of bubbles and gasses. Priming helps reduce the amount of product that will be required in the later stages. Ensure that the areas are ventilated properly. It is common to coat two layers of primer in order to properly seal the floor. Use a proper electrical mixer to mix the A and B component.


Step 4. Fill all cracks, holes etc.

This step can also take place before priming. For thin cracks, it may be necessary to slice them with a diamond cutter before filling in order to improve anchoring. There are different types of fast curing fillers and self-levelling materials on the market check with your local supply store, get in touch with us if more advice is required, we will be happy to help.


Step 5. Mix Primer coat A+B 2:1 ratio by weight  

Mix A+B first for 2 min then prime the floors with a roller, only prime if it has been prepared in advance and all cracks filled as this will save you time, money and materials.         


 Step 6. Mixing of MCR A+B 2:1 ratio+pigment

First Mix the hardener (part B) for 2 minutes after that pour component (part A) and mix for another 3min use an electric mixer for continuous movement -This step is very important- then add the pigments gradually as desired  

Adjust the speed of the power tool accordingly start at lower speed first.

Poor mixing will lead to a tacky floor!

Leave to settle for a few minutes allow bubbles to disperse.



Step 7. Apply the mixed product.

Once mixed pour the product in a random pattern across the area you wish to apply your designer floor. Using a notched squeegee spread the product gently around until you have an even coat on the surface of the floor. Then use a good quality roller, as poor quality rollers may start to shed, we recommend spiked rollers for metallic MCR floors as this type will remove air bubbles.    


Application Environments

- Shopping Malls

- Restaurants-Showrooms

- Hotel & Casino-

- Animal Hospitals

- Atriums

- Banquet Halls
- Bars, Clubs & Pubs- Bathroom

- Hallways/ Corridors Cafeterias

- Churches

- Clean Room

- Commercial Kitchens

- Greenhouses

- Grocery Stores

- Hallways/ Corridors

- Kennels- Pet Stores

- Laboratories

- Locker Rooms

- Art Galleries & Museums

- Offices

- Restrooms

- Retirements Homes

- Salons/Spas                                                                                                                                 Tools  not included in the kit 

- Stadiums

- Veterinary Clinics

- Sport Centres



- Easy of Maintenance

- Aesthetic Improvements

- Hard and Abrasion Resistant

- VOC Free, 100% Solid, No Odor

- Stain and Chemical resistant

- Anti-microbial & Anti-slip- High Gloss Finish Like Crystal

- Special Colors can match your preferred design

- Overall our MCR products are versatile easy to use simply to work with and a fabulous replacement for dull tile designs.


Packing & Delivery


     MCR Floor -Primer 15 Kgs A+B                         MCR Floor-Middle Coat, 15kgs A+B             MCR Floor-  Top Coat, 15kgs     A+B

































                                                                                          3D INTERIORS LONDON